DRYLOK® Floor & Wall Masonry Waterproofer
If water is leaking through existing masonry or you need to protect new construction, our proprietary formula is GUARANTEED to stop water.
Unlike ordinary paint that simply adheres to a surface and can be forced off by incoming water pressure.
DRYLOK® Floor & Wall Masonry Waterproofer actually penetrates the pores in that surface, bonding to the masonry and creating an impenetrable barrier.
Waterproof interior, exterior, above or below grade walls. DRYLOK® Floor & Wall Masonry Waterproofer is also perfect for floors, basements, retaining walls, decorative brick and stone facades, and more.
- GUARANTEED to stop water – withstands 4 PSI
- First clear (non-pigmented), abrasion-resistant, high-gloss waterproof coating approved for floor and wall applications
- Fully transferable 7 Year Limited Warranty
- Patent-pending formula
- Creates a moisture vapor barrier on floors as a finish coat or under latex paint or as a primer prior to applying floor coverings
- Protects against 98 mph wind-driven rain on decorative vertical surfaces
- Reduces radon gas penetration
- Not intended for use with vehicle traffic
- Clear, high-gloss finish
- Protection level: 31%±2% solids
- Sizes: gallon, 5 gallon
- Coverage: 90-100 square feet per gallon
- No pre-mixing or pre-wetting
- Application tools: brush or roller (preferred for first coat), sprayer
- Dry time: 2 hours
- Coats: minimum of 2
- Recoat time: 2 hours
- Easy cleanup with warm, soapy water
Available Color: Clear